Applicable fibers
Single / SMF (G.652/657), MMF (G.651), DSF (G.653), NZDSF (G.655)
Cladding dia. / Sheath dia.
125 μm / 160 μm to 3mm by fiber holder system
Cleave length
5mm to 16mm by sheath clamp
Splice mode / heating mode
Total 100 splice modes / 30 heating modes
Splice loss
0.05dB (SM), 0.02dB (MM), 0.08dB (DS) and 0.08dB (NZDS)
Measured by cut-back method relevant to ITU-T and IEC standards.
Splice time
Typical 9sec SM FAST, Typical 11sec SM AUTO
Tube heating time
Typical 14sec FP-03 (60mm) sleeve
Splice result storage
Last 2000 splices
Viewing methods / magnification
2 axis CMOS camera with 4.73” color LCD.
X / Y (320X magnification), or both X and Y simultaneously (200X magnification)
Tension test
1.96 to 2.25N
Applicable protection sleeve
60mm, 40mm and Fujikura micro sleeves
No. of splice / heating per battery full charge
Typical 180 cycles with BTR-09
Electrode life
3000 splices
Size / weight
146W x 159D x 150H (mm) / 2.5kg (including battery)
Operating condition
Altitude : 0 to 3,660m above sea level, Wind : 15m/sec
Temperature : -10 to 50deg C, Humidity : 0 to 95%RH, non-dew
Resistance features
Shock : 76cm (30inch) all surface drop
Dust : Exposure to dust (0.1 to 500μm dia Alumina Silicate), IP5X
Rain : H=10mm/hr for 10min, IPX2
Other features
PC software upgrade / data management
Terminals
USB 2.0 (Mini-B type) connector for PC communication.
6-pin Mini-DIN connector for HJS-02 or HJS-03 power supply.
Katalóg produktu
