Applicable fibers
Single / SMF (G.652/657), MMF (G.651), DSF (G.653), NZDSF (G.655)
Cladding dia. / Sheath dia.
80 – 150μm / 100 – 3000μm
Cleave length
5mm to 16mm with sheath clamp
Splice mode / heating mode
Total 100 splice modes / 30 heating modes
Splice loss
0.02dB (SM), 0.01dB (MM), 0.04dB (DSF) and 0.04dB (NZDS)
Measured by cut-back method relevant to ITU-T and IEC standards.
Splice time
Typical 6sec ULTRA FAST
Typical 7sec SM FAST, Typical 10sec SM AUTO
Tube heating time
Typical 23sec FP-03,coating dia.250μm
Typical 25sec FP-03,coating dia.900μm
Typical 15sec Slim 60mm, Slim 40mm coating dia.250μm
Splice result storage
Last 15.000 splices
Viewing methods / magnification
2 axis 2CMOS camera with 4.73” color LCD.
320X magnification, 400X magnification after splicing.
Tension test
1.96 to 2.25N
Applicable protection sleeve
60mm, 40mm and Fujikura micro sleeves
No. of splice / heating per battery full charge
Typical 200 cycles with BTR-09
Electrode life
5.000 splices
Size / weight
146W x 163D x 148H (mm) / 2.6kg (including battery)
Operating condition
Altitude : 0 to 5.000m above sea level, Wind : 15m/sec
Temperature : -10 to 50deg C, Humidity : 0 to 95%RH, non-dew
Resistance features
Shock : 76cm (30inch) 5 difference surface drop
Dust : Exposure to dust (0,1 to 500μm dia Alumina Silicate)
Rain : H=10mm/hr for 10min
Other features
PC software upgrade / data management
Katalóg produktu
